To Control the process
Introducing the stage 3 Electronic Controller System
for the Plasmic Transition Process Engine
An EARLY Electronic Control System (ECS) system (Inteligentry)
Development Control Consulting Group's Electronic Control System - electronic controller
System Control Overall Block Diagram. for a new Plasmic Transition Engine Control System (ECS).
Lets clear the air about a rumor!!!
There is some confusion being created and passed around by a nameless party, it
seems, about the progression of OUR controllers. We did not, in any way, duplicate anything
like the old 1982 thing that made the old Papp International "Papp" engine work.
The first and simplest control circuit, that John Rohner designed, was a modern mimic of the old Papp International "Certified" motor controller, that John designed. It was based on his notes, drawings and a his timing MAP, also presented in Papp Patents, as he corrected it. It was very simple, but..... John did "simulate" his Ancient control circuit to verify it met the published data about timings, would work within the constraints reported and would perform within the very limited confines of operation as shown in the HISTORICAL videos.
BUT this Antique Controller design was never meant to be used, as is very restrictive, cumbersome and inflexible. But, STILL much better than Mechanical and Relay types.
Also, the Plasmic Transition Process system, has no need to reverse coil windings, cross couple capacitors or any of the Mickey Mouse other things from the Papp patent write up. These may be OK if the target is a "perpetual motion" dream but useless in reality. Our early simulations showed that the gains from all this added complexity was miniscule in both power output or fuel retention and our tests since have proven this is true. It's a messy thing to do and useless.
If you are considering manufacturing a
Plasmic Transition Process
engine of your own, as a licensed manufacturer, or buying them
from a "licensed" Plasmic Transition Process manufacturer
or another OEM, then we will have the controller for you.
After you have obtained a license for using or manufacturing
Plasmic Transition Process then:
We will work directly with you to develop the most flexible, safe and complete controller that your requirements could need. That way you get the best possible product!
Maybe Within 5 years we should be able to replace all coal, petroleum and nuclear power plants with NON polluting, Non heating upgrades or PERSONAL home systems.. And none of those big noisy ugly windmills either. Nice quiet VERY Green power.
Here are some pictures of the REAL Inteligentry Electronic Controller as designed, developed, created and tested using the above architecture and copyrighted System Control logic system per pending patent(s) all rights reserved.
This controller system was the basis for the Demonstration Generator set that John Rohner was testing and preparing to show the Inteligentry Investors March 25 th.
John made some adjustments to both the hardware and firmware and was preparing a "formal" document to spell out a more flexible Firmware when the SEC/FBI closed the company.
Luckily, for us here, in the last year Plasmic Transition Process, the new company for the old EX Inteligentry Investors and employees has redesigned the control and firmware into a even more mature, safe and reliable system.
John called upon some of his many friends in the "embedded Control" field of consulting engineers and has worked with them to provide the next step.
Thus the investment made into Inteligentry has flowered and is now live here and all that has been lost is time.
The ex Inteligentry investors should be very proud of what was developed at Inteligentry before the SEC/FBI aborted that product and the SEC expected to have cost you all your money and dreams.
The dream lives and is moving forward for all who were smart enough to have patience.
OUR Developments Are based on our Innovative designs, knowledge, and Understanding of the Plasmic Transition Process(tm).